Storefront Door / D&D Builders Hardware Co. in Taiwan accepts OEM cases and uses our manufacturing ability to produce hardware according to demands from all of our customers.

Storefront Door

Storefront door

D&D produces a lot of hardware for storefront door and they are 100% made in Taiwan, such as transom closer, push pull handle, deadlatch, deadlock, mortise cylinder, lever handle, paddle handle, pivot hinge, interchangeable pivot, storefront offset pivot, hydraulic door closer, patch fittings and so on.

Thanks to the storefront door is the main entrance and also will make the first sight of the venue, D&D can make the hardware per the finish you request to show the consistency of the venue.

D&D carries the widest selection of storefront door hardware you need for most commercial storefront doors.

If there is any need, please feel free to send your inquiry to DDSALES@DND.COM.TW.

Products

• 

  Standard Duty Deadlatch

  LD-01

  ---

  Flexibility of traffic control during and after business hours is offered by D&D LD-01 deadlatches. A reverse turn of the key while bolt is held retracted retains the bolt to allow two-way traffic and hold the door open temporarily for hospitals, banks, stores and other buildings which require free entrance at times and exit-only at other times.

  ---

• 

  Deadlock with hookbolt

  LH-01

  ---

  The LH-01 deadlock utilizes a hookbolt of five ply laminated steel bolt with concealed hardened steel pin and provides maximum security on any single leaf door, even a very tall and flexible one or an installation where the gap between door and jamb is greater than it should be.

  ---

• 

  Deadlock with bolt

  LT-01

  ---

  The LT-01 deadlock utilizes a huge bolt of five ply laminated steel bolt with concealed hardened steel pin and provides maximum security on any single leaf door, even a very tall and flexible one or an installation where the gap between door and jamb is greater than it should be.

  ---

• 

  Keyed Mortise Cylinder

  CY-21

  ---

  D&D mortise cylinders are machined from solid bar brass. If you have cost concerned, material in zinc alloy is available as well.The CY-21 mortise cylinder offers 5 pin security to work with most of our deadlocks or deadlatches.

  ---

• 

  Thumbturn Mortise Cylinder

  CY-22

  ---

  D&D thumbturn mortise cylinders are machined from solid bar brass. If you have cost concerned, material in zinc alloy is available as well.The CY-22 mortise cylinder operates most of our deadlocks or deadlatches without a key.

  ---

• 

  Lever Handle for Deadlatch

  HLC-01

  ---

  The lever handle can easily unlock the deadlatch or deadlock by a downward hand movement. The lever handle includes an activator cam mounts on the handle escutcheon and fits into the cylinder hole of latch.Lever of silver painted is shaped to fit the hand, with a concave thumb-rest portion that tends to keep knuckles and thumb safely away from the jamb, even on a short backset narrow stile.

  ---

• 

  Paddle Handle for Deadlatch

  HLC-02

  ---

  The paddle handle can easily unlock the deadlatch or deadlock by push or pull. The latch paddle device includes an activator cam and fits into the cylinder hole of latch.The paddle makes opening a latched door as natural as opening an unlatched one, just push or pull in the way the door swings.

  ---

• 

  Bottom Rail Deadbolt Lock

  LB-01

  ---

  similar to Adams Rite MS1861-01 series bottom Rail deadbolt

  ---

• 

  Door Closer similar to Dorma TS 77

  DC-D7800 series

  ---

  The DC-D7800 series surface mounted door closer is a basic entry door closer. A standard door closer with scissor arm will be an economical solution for swing doors. The closer's body can be fixed on the door leaf, top frame for vertical or parallel installations by standard accessories plus optional L plate.The DC-D7800 series surface mounted door closer specially apply for light metal and wood doors in commercial and residential builidings.

  ---

• 

  Door Closer similar to Dorma TS 68

  DC-D8800 series

  ---

  The DC-D8800 series surface mounted door closer is a basic entry door closer with round shape. A standard door closer with scissor arm will be an economical solution for swing doors. The closer's body can be fixed on the door leaf, top frame for vertical or parallel installations by standard accessories plus optional L plate.The DC-D8800 series surface mounted door closer specially apply for light metal and wood doors in commercial and residential builidings.

  ---

• 

  Hydraulic door closer with optional cover

  DC-D9800 series

  ---

  The DC-D9800 series door closer offers the most popular upright cubical shape in Europe. We provide the stainless steel cover as an option for more beautiful appearance. The door closer has many applications for almost door sizes and it can be fixed and closing speed adjusted easily.The DC-D9800 series door closer is an economic solution for standard doors with stable quality assured.

  ---

• 

  Concealed Door Closer with sliding arm

  DC-D38, DC-D45, DC-M45 series

  ---

  The DC-D3800 and D4500 door closer are designed for concealed installation in door leaf and door frame. This invisible door closer has the same function as the exposed door closer, but it is hidden in the door and door frame. The conceal door closer is suitable for almost every type of doors including internal and external doors.*Forbid selling to Japan: DC-D3800 / D4500 series.

  ---

• 

  Hydraulic Door Closer without cover

  DC-M9800 series

  ---

  The D&D door closer DC-M9800 series provides different closer body sizes A, B, C types. We don't make the cover for these door closers, but there is a simple aluminum plate to cover the fixing hole and adjusting speed valves.These traditional door closers conform to PSB and UL standards, 100% mad in Taiwan with reliable quality. We promise 5 years warranty and lifetime after sales service.

  ---

• 

  Universal floor spring, similar to Dorma BTS 84

  FS-S9300 series

  ---

  The FS-S9300 floor spring is designed for double action doors, but it is also no problem for single action doors. The FS-S9300 floor spring has an overall depth of 40 mm only to be easily suited individual requirements.The specially shallow design of FS-S9300 floor spring allows it to be installed very effectively in the floor, the floor spring can meet almost any requirement with assured quality standards.

  ---

---

E-Catalogue Download

• 

  Door Lock

  ---

  A wide range of door locks like deadbolt, deadlatch, hookbolt, mostise lock and cylinders are provided for more applications.

  ---

• 

  Deadlatch, LD-01

  ---

  Similar to Adams Rite 4510 standard duty deadlatch. Flexibility of traffic control during and after business hours is offered by D&D LD-01 deadlatches. A reverse turn of the key while bolt is held retracted retains the bolt to allow two-way traffic and hold the door open temporarily for hospitals, banks, stores and other buildings which require free entrance at times and exit-only at other times.

  ---

• 

  Deadlock for swing door and sliding door, LT-01 & LH-01

  ---

  The deadlock utilizes a huge bolt or hookbolt of five ply laminated steel bolt with concealed hardened steel pin and provides maximum security on any single leaf door, even a very tall and flexible one or an installation where the gap between door and jamb is greater than it should be.

  ---

---