D&D ED-300 Grade 1 Exit Devices | UL Listed Fire Rated Panic Hardware
UL certified Grade 1 exit devices meeting ADA standards with 3-hour fire rating. Surface vertical rod & rim designs for commercial fire exit doors.
Grade 1 Exit Devices similar to Cal-Royal 2200 & 2260 series
ED-300 series
Exit devices for single and double exit doors
The grade 1 exit device ED-300 series provides a UL certified solution to meet ADA standards for maximum 5 lb operating force and conforms to standard UL 10C 3 hours fire rating.
When your application calls for reliable and durable quality, ED-300 series of exit devices fills the need. D&D’s exit devices meet life safety and compliance challenges with opening solutions that make access in life – smart and secure.
**Forbid selling to America & Canada.**
Features
- ANSI A156.3, Grade 1 exit device in surface vertical rod and rim designs.
- UL Listed for panic and UL 10C, UBC 7-2-1997 codes
- UL Listed for fire exit hardware, 3 hours
- Label rating in pairs of doors up to 8’ x 8’ swing in the same or opposite directions.
- Conforms and meets ADA regulations
- Retrofits Sargent 12-2828 and 12-2838 series
- Uncompromising security and safety in single and double fire exit doors
- Chassis mounted unit construction
- Available in various applications
- Lever and escutcheon trims are grade 1 construction with clutch freewheeling mechanism
Specification
- Minimum stile: 4-1/2”
- Standard door thickness 1-3/4”
- Latch bolt: stainless steel 3/4”
- Chassis: nonferrous alloy (Panic rated), steel (Fire rated)
- Spring: stainless steel throughout
- ANSI standard: A156.3, Grade 1
- Dogging feature: Allen key furnished standard on non-fire rated devices
- Touch bar: height to finish floor, 41” from floor
- Touch bar project: Neutral 2-1/2”, Depressed 1-3/4”
- Center case: 5-1/8” x 2-3/4” x 2”
- Material of cap and rail: brass, stainless steel or steel depends on finish
- Finish: aluminum painted or satin stainless steel (US32D). Other finish like duro or gold is available by request.
- Non-handed for rim type
- Reversible Left handed and Right handed for vertical rod type
Packing details
- 1 set in one box
- 6 sets in one carton
Applications
- For commercial applications, including wood doors, steel doors or aluminum doors
- All exit devices shall be of touch bar design with smooth operation and be operative over 2/3 of the door's clear opening width.
- All exit devices must be listed under "Panic Hardware" in the Accident Equipment List of Underwriters' Laboratories, Inc. Where labeled doors are used as exits, they must be equipped with labeled Fire Exit Hardware and UL 10C, UBC 7-2-1997 codes.
- All exit devices shall be of chassis mounted unit construction.
- E-catalogue Download
-
Exit Device
Partial of our exit devices are UL listed, grade 1 with 500,000 cycle test. A panic bar or fire rated exit device is necessary for emergency conditions...
Download - Related Products
-
Lever and Rose Trim for ED-100, ED-300, ED-500, ED-600 series Exit Device
8000 series
The lever design outside trim offers on the ED-100, ED-300, ED-500 and ED-600 series exit devices.
Details
Konb Trim for ED-300 series Exit Device
8000K
The knob design outside trim offers on the ED-300 series exit devices.
Details
Lever Escutcheon out trim
ESC series
The lever escutcheon design outside trim can be used with the ED-100, ED-300, ED-500, ED-500...
Details
Gravity Coordinators
CN-01
When active door is open, the coordinator prevents active door from closing until inactive...
Details
Bar Coordinators
CN-02
The bar coordinator is designed for use on pairs of doors when one door needs to close before...
Details
Popular Products
How Can You Ensure Fire Exit Compliance While Meeting ADA Accessibility Standards?
The ED-300 series solves your dual compliance challenge with UL Listed 3-hour fire rating and ADA-compliant 5 lb operating force in a single solution. Our chassis-mounted Grade 1 exit devices are labeled for doors up to 8' x 8', eliminating the complexity of sourcing separate systems. Contact us to receive technical specifications and installation guidance tailored to your commercial project requirements.
D&D's ED-300 exit devices retrofit Sargent 12-2828 and 12-2838 series, offering versatile solutions for wood, steel, and aluminum doors in commercial environments. The touch bar design operates smoothly over 2/3 of the door's clear opening width, with Grade 1 lever and escutcheon trims featuring clutch freewheeling mechanisms. Label rated for pairs of doors up to 8' x 8' swinging in the same or opposite directions, these exit devices provide comprehensive opening solutions for hospitals, schools, hotels, and commercial buildings. With nonferrous alloy chassis for panic-rated applications and steel for fire-rated needs, the ED-300 series delivers the durability and compliance required for life safety installations.